Current
to Voltage Transducer CR4310/11 Series produces
a 0-5 Vdc output signal that is directly proportional
to the input AC current. The output signal is average-sensing,
calibrated for RMS.
Current to Voltage Transducer CR4310/11 Series is
used with process control and industrial instrumentation
equipment. The DC output signal can be connected
directly to a high impedance analog input of a computer
or PLC without additional signal conditioning.
Current to Voltage Transducer CR4310/11 Series will
measure up to 200% of full scale on a short time
basis (1 minute or less) and 150% on a continuous
basis at its rated accuracy. To protect external
circuits from damage caused by short circuits or
motor inrush currents, the output is limited to
12 Vdc.
